Firmware updates for ADI-2 Pro and DAC. MacOS USB driver 3.18 available. TotalMix Remote 1.12 released. MacOS 10.15 (Catalina) Preview beta drivers available. M-32 Pro series firmware update 1.2.2 available. MacOS HDSPe series driver 4.13 released. Windows USB driver 1.168 available. When connected through USB 1.1, the UA-101 will function as a stereo audio interface at 44.1 or 48kHz with any Win98 or later PC or Mac OS 9 or Mac OS X computer. When connected to Windows XP computer running USB 2.0, the UA-101 offers the full set of I/O options to your computer.
We look at ten of the best home audio interfaces across a range of price points, with portable units and extensively connectable rack-mounted options featuring.
The home studio is now more common than ever, with domestic set-ups now capable of producing results that previously would have required many thousands of pounds to achieve. Although this is in no small part due to the falling price of computer hardware, any external instruments or microphones will be useless without a decent audio interface to capture their sound. Although affordable units with exhaustive connection options are increasing, recent years have seen large feature sets crammed into ever smaller packages which are easily transported in a backpack for live performance or collaborative studio sessions. This list attempts to navigate both types, choosing ten audio interfaces spread across the price range which will deliver vastly different attributes to your home studio mix-downs.
A theme Microsoft worked on in 2000 for its Windows XP operating system made computers look more like a Mac. This is evident from the recently leaked source code of Windows XP, writes. Microsoft named its theme 'Candy' and is very similar to Apple's 'Aqua' interface. TASCAM US-600 Audio Interface Driver 1.00 for Mac OS 1,536 downloads. Sound Card TASCAM. Jan 1st 2012, 18:55 GMT. TASCAM US-1800 Audio Interface Driver 2.02 x64 4,329 downloads. Windows Vista 64 bit, Windows XP 64 bit, Windows Vista, Windows XP.
Lexicon Alpha
The Lexicon Alpha is a simple audio interface that is ideally suited to Mac or PC owners that want to dip a tentative toe into the world of home recording. The unit itself contains two input channels with an instrument input on channel one and an XLR microphone input on channel two. It should be noted that there isn’t any 48 volt phantom power on the unit, partially due to the fact that the Alpha is completely powered from your computer’s USB bus. If you are recording a stereo instrument, such as a keyboard, then there are two 1/4” line inputs on the rear. You can adjust your monitor mix using the dedicated knob that allows you to get a good balance between the channel that you are recording and any playback you are recording to. There is also a dedicated main output level control.
The Lexicon Alpha has a set of stereo RCA outputs, as well as left and right 1/4” TRS outputs and if needed, there is 3.5mm headphone port on the front panel. To aid your exploration of home-based productions, Lexicon have included a light edition of Steinberg’s Cubase 5 as well as their acclaimed Pantheon VST reverb plug in. The Alpha is the perfect choice for those that want to try home recording for the first time or for users needing a simple audio interface that they can easily carry around with them.
Buy from Juno
Specifications:
| Audio I/O | 2×2 |
| MIDI I/O | No |
| Sample/Bit rate | 48kHz/24 bit |
| Phantom Power (48-volts) | No |
| Controls | 2x input gain, 1x monitor mix level, 1x output level, 1x monitor stereo/mono toggle button |
| Metering | Peak meter |
| Connection | USB |
| Software | Steinberg Cubase LE 5, Lexicon Pantheon VST reverb plug in |
| Dimensions (cm) | 7x6x2 |
| Weight (kg) | 0.49 |
| System Requirements (PC) | Windows Vista, XP, Pentium/Athlon 1.4GHz, 512MB RAM, Display Resolution 1024×768 pixels, Direct X compatible hardware, ASIO compatible audio hardware recommended for low latency, DVD ROM drive, Internet access |
| System Requirements (Mac) | G4 1GHz, or Core Solo 1.5GHz, 512MB RAM, OS X 10.4, Display Resolution 1024×768, Core Audio caompatible hardware, DVD ROM drive, Internet Access |
Alesis iO2 Express
For producers on a tight budget, the iO2 Express from Alesis comes as a compact two channel USB solution. Each input channel has a separate XLR and 1/4” TRS jack port, as well as a 1/4” TRS insert port that will accommodate recording with external effects, while switchable 48-volt phantom power will get the most efficient use from your microphone. To help you get the best input signal you are also afforded dedicated gain controls for both input channels. You can monitor your sessions by plugging your speakers into the1/4” TRS ports on the rear, or by using the top facing headphone socket with its own level control and mono/stereo switch. One of the advantages of this unit is in its portability, making it ideal for working with a laptop in, or out, of the studio, and being bus powered it means that there is no need to pack cumbersome power cables.
The iO2 Express also ships with a light edition of the hugely popular Steinberg Cubase music production software, and being class compliant, it means that you can simply plug your iO2 Express into your Mac or PC without the hassle of installing troublesome drivers. The functionality of this pint-sized interface doesn’t end there either as it features MIDI I/O ports on the rear for connecting any kind of controller that supports MIDI, including keyboard controllers. Add to this the stereo level meter for visual monitoring and you have a unit that is as flexible as it is affordable for producers on the move.
Buy from Juno
Specifications:
| Audio I/O | 2×2 |
| MIDI I/O | Yes |
| Sample/Bit rate | 48kHz/24 bit |
| Phantom Power (48-volts) | Yes |
| Controls | Monitor Mix, Channel Gain, Main Level, Mic/Line, +48 V, mono/stereo |
| Metering | Stereo, Tri coloured |
| Connection | USB |
| Software | Cubase LE |
| Dimensions (cm) | 13x5x16 |
| Weight (kg) | 0.4 |
| System Requirements (PC) | Windows XP, Vista, 7 or 8 w/ free USB port |
| System Requirements (Mac) | OS X 10.6, 10.7, 10.8 w/ free USB port |
Focusrite Scarlett 2i2
There isn’t a major studio on the planet that doesn’t feature some Focusrite equipment being used on a daily basis, and part of the huge popularity of this brand is their knack of combining high quality components in simple and easy to use gear. In particular, they are famous for their pre amps, and even in a small two input, two output audio interface like the Scarlett 2i2, they don’t disappoint. With two combination inputs (XLR/1/4” TRS), line/instrument selectors and gain control on each channel, this interface couldn’t be easier to use. To help you get a good clear signal going into your computer there is visual feedback in the form of a halo LED indicator around each gain knob. When there is a level signal going in, it shows green and as it gets hotter it changes colour with red indicating peak level.
The Scarlett 2i2 from Focusrite has an equally simple output system in the shape of stereo 1/4” jack ports on the rear of the unit, a headphone port on the front with separate level controls for the main outs and the headphone outs. You can also toggle between direct monitoring of the input channels and playback, and if you are using a good quality condenser microphone, then there is phantom power to help you get an optimum signal. The Scarlett 2i2 comes with Ableton Live Lite software as well as Focusrite’s Red range of plug-ins, including a compressor and reverb. This unit is suited to musicians looking for a quality audio interface that is simple to use, can be taken out of the studio and on the road and at the same time won’t break the bank.
Buy from Juno
Specifications:
| Audio I/O | 2×2 |
| MIDI I/O | No |
| Sample/Bit rate | 96kHz/24 bit |
| Phantom Power (48-volts) | Yes |
| Controls | 2x gain knobs, 1x monitor knob, 1x headphone level knob, 2x line/inst switches, 1x direct monitor toggle switch |
| Metering | Multi-coloured halo input meters |
| Connection | USB 2.0 |
| Software | Ableton Live Lite 8, Focusrite Scarlett plug in suite |
| Dimensions (cm) | 5x18x10 |
| Weight (kg) | 0.58 |
| System Requirements (PC) | Windows 7/XP/SP3(32 bit only) (Vista not supported) |
| System Requirements (Mac) | OS X 10.6.5 Snow Leopard and higher (including OS X 10.7 Lion) |
M-Audio MTrack Plus
Simple two channel USB audio interfaces are ideal for busy musicians and producers that are constantly moving from plane to hotel room, and the MTrack Plus from M-Audio makes for a compelling travel companion. It features two input channels with gain level control as well as dedicated XLR and 1/4” TRS sockets. The switchable 48 volts helps you get the most from your mics and there is a switch that will allow you to plug guitars directly into the interface for recording without any added fuss. The robust chassis features a clear segment meter for visual reference as well as main output level control and a headphone socket with its very own volume control, while its compact design also has MIDI I/O for connecting keyboard controllers or any device that can transmit or receive MIDI. The design is similar to the iO2 Express from Alesis but in this case the MTrack Plus features digital I/O in the form of S/PDIF as well as the stereo 1/4” TRS outputs.
Impressively, the MTrack Plus from M-Audio comes with two sets of complementary software in the shape of Pro Tools Express, that needs little introduction, and Ignite from AIR Music Technology, which is software designed to allow you to quickly arrange musical ideas, featuring 275 software instruments as well as supporting audio recording with effects that can be added later; you can also export .wav and MIDI files for importing into larger projects on other platforms at a later date.
Buy from Juno
Specifications:
| Audio I/O | 2×2 |
| MIDI I/O | Yes |
| Sample/Bit rate | 48kHz/24 bit |
| Phantom Power (48-volts) | Yes |
| Controls | Headphone level, main level, gain level, mic/line, +48 V, mono/stereo |
| Metering | Stereo, Tricoloured Segment |
| Connection | USB |
| Software | Avid Pro Tools Express, Ignite by AIR |
| Dimensions (cm) | 22x18x13 |
| Weight (kg) | 0.7 |
| System Requirements (PC) | Windows 7 Home, Pro, Ultimate, 8, or 8 Pro, Intel Core 2 Duo 2 GHz, 2GB RAM, 4GB HD space, free USB port, ASIO or WASAPI audio drivers |
| System Requirements (Mac) | OS X 10.7.5 or 10.8, Intel Core 2 Duo 2 GHz processor, 2GB RAM, 4GB HD space, free USB port, Core Audio drivers |
Mackie Onyx Blackbird
Sometimes recording projects come along that require an interface that can handle more than a few input and output channels at the same time. The Onyx Blackbird from Mackie is one such device, featuring eight high end Onyx mic pre-amps with Cirrus Logic AD/DA converters in a single rack mountable unit that connects to your computer via Firewire. The inputs are served by combination ports that allow for XLR & 1/4” TRS jacks and also features so-called super channels that contain built in DIs with lo-cut at 80Hz that will allow you to deal with almost any kind of input signal that is thrown your way. There are two headphone ports on the front of the unit with independent level control, easing monitoring duties during recording.
You can plug your studio monitors directly into the Onyx Blackbird, although it features two other stereo outputs, making three stereo pairs in all, each featuring independent control. The unit comes with Blackbird control DSP Matrix mixer that gives you extended routing options as well as the ability to perform quick mixes in any given situation including live recording. The extensive digital I/O options include word clock I/O for incorporating additional gear, as well as 8×8 ADAT I/O for connecting another Blackbird to increase the channel count. In addition, Mackie have included Tracktion 3 music production software for Mac & PC, although the unit is compatible with any DAW you can think of including Pro Tools 9. For simultaneous multi-channel recording, with plenty of expansion options at an affordable price, it would be a wise move to consider the Onyx Blackbird from Mackie.
Buy from Juno
Specifications:
| Audio I/O | 16×16 |
| MIDI I/O | No |
| Sample/Bit rate | 96kHz/24 bit |
| Phantom Power (48-volts) | Yes |
| Controls | Gain, monitor, headphone |
| Metering | peak indicator |
| Connection | Firewire |
| Software | Tracktion 3 Music Production software |
| Dimensions (cm) | 5x26x48 |
| Weight (kg) | 3.7 |
| System Requirements (PC) | Windows 7/Vista/XP, Pentium 4, Celeron or Athlon XP processor, 512MB RAM |
| System Requirements (Mac) | OS X 10.4.11/10.6.2, G4 processor, 512 MB RAM |
MOTU Ultralite MK3 Hybrid
MOTU are the brand that developed the first Firewire 400 audio interface in the form of the hugely successful 828, a product which has cemented their position as a household name in music production circles. The “Hybrid” tag is due to the fact that the Ultralite Mk3 model can connect to your Mac or PC using Firewire 400 or USB 2.0, making it a versatile and convenient addition to your home studio set up. There are eight inputs, with the first two being combination sockets that can deal with both XLR and 1/4” connections, while the other six are all 1/4” TRS type. Outputs are handled by eight 1/4” sockets along with S/PDIF I/O and to top it all off, there are MIDI I/O ports, further enhancing the flexibility of this compact but feature-laden interface.
One of the unique aspects of this unit is the built in CueMix FX that include impressive on-board DSP effects including reverbs, EQ and compression on every input and output. Implementing the effects can be done from either the front panel on the unit itself or from the cross-platform mixing software and once set up, you are then able to unhook the unit from your computer (as long as the power is plugged in) and use the unit in standalone mode. In short, the UltraLite Mk3 Hybrid from MOTU has plenty of I/O options and is small enough to be able to travel with for use in studio productions or on stage.
Buy from Juno
Specifications:
| Audio I/O | 10×14 |
| MIDI I/O | Yes |
| Sample/Bit rate | 192kHz/24 bit |
| Phantom Power (48-volts) | Yes |
| Controls | 2xinput trim knobs, 1xvolume push encoder, 4 x data knobs |
| Metering | Pad/48V, LED |
| Connection | USB 2.0/Firewire 400 |
| Software | CueMix FX software |
| Dimensions (cm) | 38x29x14 |
| Weight (kg) | 3.18 |
| System Requirements (PC) | Windows 9, 7, Vista, XP (32/64bit), XP SP3 Pentium 1GHz, Pentium 3 or faster |
| System Requirements (Mac) | OS X 10.8, 10.7, 10.6, 10.5 or 10.4.9 CPU 500MHz or faster |
Apogee Duet
Apogee have brought their world class AD/DA converters to bear on Mac-based productions with great success, and now they have set their sights on iPads, iPhones and the iPod touch. This simple two in and two out design can serve both Mac OSX and iOS devices, bringing a professional touch to an even wider pool of music creators. The unit is served by a breakout cable that includes two combination inputs for serving XLR and 1/4” TRS jacks, and two balanced 1/4” line outputs. There is also a separate headphone output that can be assigned a separate stereo output using the supplied Maestro software. In typical Apogee fashion, the unit has a single push encoder on the front face, along with two touch sensitive pads and small but clear LED meters for visual reference of your ingoing and outgoing levels.
The 24 bit recording quality the unit allows will allow enable you to record a stereo instrument or a vocalist and guitarist using most DAWs including GarageBand, Logic and Pro Tools. With the addition of switchable phantom power for getting the most from your microphone, and Apogee’s highly regarded soft limit to protect the integrity of your takes whilst protecting the optimum signal, the Duet is perfect for either recording small groups of musicians, monitoring computer-based productions or even for laptop DJs.
Buy from Juno
Specifications:
| Audio I/O | 2×2 |
| MIDI I/O | No |
| Sample/Bit rate | 192kHz/24 bit |
| Phantom Power (48-volts) | Yes |
| Controls | 1x encoder, 2x touch pads |
| Metering | Line & mic input level, main & headphone stereo output level |
| Connection | USB (30-pin dock connector with iPad,iPhone,iPod touch) |
| Software | Maestro |
| Dimensions (cm) | 16x10x2 |
| Weight (kg) | 1.1 |
| System Requirements (PC) | Not compatible |
| System Requirements (Mac) | OS: 10.6.8, 10.7.5 or greater, Intel Mac 1.5GHz. 2GB RAM. IOS 5.1.1 or greater, 30-pin dock connector |
RME Fireface UCX
One of the most respected audio interface brands to emerge in recent times has been RME. The Fireface UCX, from the German company, is only half a rack unit in size but it hosts 36 digital channels (18 inputs/18 outputs), eight analogue I/O, including two combi connections and two line level connections, as well as a handy remote control unit for quick tactile control over level and programs, and MIDI I/O with a breakout cable that gives you two inputs and two outputs. Also included is the TotalMix FX (with UFX effects engine). You can save and recall preset routings using the single knob and two digit display on the front face of the unit and along with an impressive array of digital connections, including S/PDIF I/O, word clock I/O and ADAT I/O, it’s conceivable that this diminutive audio interface could turn its hand to the most demanding of mobile recording sessions.
In line with its mobile music creation credentials, the RME Fireface UCX can also operate in class compliant mode, allowing it to connect to your iPad via a camera connection kit, giving you eight ins and a stereo output. There is no difference in sound quality between audio created on an iPad to that created on a Mac or PC due to the fact that, with the iPad, it uses its own steady clock rather than the USB clock. If you want to unhook the unit from your computer, then the Fireface UCX can save up to six routings for instant recall as a complete stand alone unit. If you need uncompromising sound quality with total flexibility and expandability, then take a close look at the RME Fireface UCX.
Buy from Juno
Specifications:
| Audio I/O | 18×18 |
| MIDI I/O | Yes |
| Sample/Bit rate | 192kHz/24 bit |
| Phantom Power (48-volts) | Yes |
| Controls | 1x push encoder |
| Metering | Signal/clip |
| Connection | USB 2.0/Firewire400 |
| Software | TotalMix |
| Dimensions (cm) | 5x10x24 |
| Weight (kg) | 1.25 |
| System Requirements (PC) | Windows 7/Vista/XP SP2 (32/64bit) |
| System Requirements (Mac) | OS X 10.5 Intel or up (Core Audio) |
Apogee Quartet
Apogee have made a name for themselves as world leaders in the field of AD/DA conversion (audio to digital and digital to audio) and this expertise has been packaged and made available in audio interfaces for professional studios all the way down to small home setups. The Quartet builds on the popularity of the two channel Duet unit, providing four inputs and six outputs of pristine Apogee clarity in a single machine. The four combination sockets on the rear will allow you to connect both XLR and 1/4” inputs with a single push encoder and touch sensitive pads to control the input and output levels. The simple design of the front face accommodates accurate metering for the four input channels and three clearly labelled stereo outputs and headphone monitor.
The Apogee Quartet is also one of the first multi-channel interfaces for the iPad, iPod touch and iPhone, including the iPhone 5 using Apple’s Lightning to 30-pin adapter. For complete control over the Quartet’s inputs and outputs, Apogee have developed the Maestro software that comes in the box with the unit. PC users should note that the Quartet is only compatible with iOS & Mac devices but can be used with a wide variety of music production software including Pro-Tools. If you are a serious desktop producer, that values top level AD/DA conversion with no compromises and fast tactile control, then the Quartet from Apogee will more than likely be your choice audio interface.
Buy from Juno
Specifications:
| Audio I/O | 4×6 |
| MIDI I/O | Yes |
| Sample/Bit rate | 192kHz/24 bit |
| Phantom Power (48-volts) | Yes |
| Controls | 1x push encoder, 9x touch sensitive pads |
| Metering | Accurate segment |
| Connection | USB 2.0 |
| Software | Apogee Maestro |
| Dimensions (cm) | 26x14x8 |
| Weight (kg) | 2.3 |
| System Requirements (PC) | Not compatible |
| System Requirements (Mac) | OS: 10.6.8, 10.7.4 or greater, Intel Mac 1.5GHz or faster, 2GB RAM |
RME Fireface UFX
RME are the German developers that are famed for creating solid, innovative and high quality digital audio solutions and their flagship audio interface is no exception. The Fireface UFX boasts a whopping 60 channels of audio management which includes 12 analogue inputs, four of which come in the convenient combination socket configuration allowing you to connect XLR and 1/4” TRS type jacks. The remaining eight inputs are the standard balanced 1/4” TRS type that can be found on the rear with a further 18 digital channels available via AES/EBU and ADAT. In addition the second ADAT I/O can be used as a S/PDIF I/O which further expands the flexibility of this high grade interface and, if that is not enough, both word clock and MIDI I/O are also available. The controls on the unit are simple, with a single knob for main output, headphone one and headphone two volume. Cycling through the outputs is done by pushing the volume control knob, and this kind of tidy design can be found through the entire RME range.
The Fireface UFX connects to your computer using either USB 2.0 or Firewire 400, and to get a more comprehensive control over the unit, RME have included the DSP-based TotalMix mixer and FX software that include EQ, reverb, dynamics and delay sends. However, the unit can also function without any assistance from your computer and in this state it is possible to recall six pre-programmed setups or use the clear colour display and physical front panel controls to set up the unit for recording. Finally, it’s possible to connect any USB thumb drive or external hard drive to the front port on the unit and record directly to the external device. All channels can be recorded discreetly in this manner or you can record to your computer hard drive and the external drive at the same time, so you have a back up. The Fireface UFX is the perfect solution for anyone doing any location recording or live band recording; tantalizingly, if you are a band that uses a lot of production on backing tracks then the unit also works as a standalone multi-channel playback solution that can operate without the computer. For a complete audio solution in a single unit, the Fireface UFX is as comprehensive as you will find.
Buy from Juno
Specifications:
| Audio I/O | 30×30 |
| MIDI I/O | Yes |
| Sample/Bit rate | 192kHz/24 bit |
| Phantom Power (48-volts) | Yes |
| Controls | 1x push encoder, 2x knobs, 4x buttons |
| Metering | 2x LED meters |
| Connection | USB2.0/Firewire 400 |
| Software | TotalMix |
| Dimensions (cm) | 56x31x13 |
| Weight (kg) | 3 |
| System Requirements (PC) | Windows 7/Vista/XP SP2 (32&64bit) |
| System Requirements (Mac) | OS X 10.5 Intel or up (Core Audio) |
Mac Theme For Xp
On a Windows PC, the desktop is usually filled with shortcuts to apps, pre-installed bloatware that you didn’t ask for and a lot of other stuff.
And if you’ve been using Windows 8, it’s the same on the Start screen.
There’s none of that here.
Mac Interface For Xp Sp3
The desktop is clean. Suspiciously so. The only thing you’ll see here are the hard drive partitions (if you choose to add them), any connected USB drives and the screenshots you take.
The desktop on a Mac is not something you stop and look at. It’s something you see in the passing. When you quit and launch an app, for example.
Just Switched to a Mac? Get our eBook – The Ultimate Guide to OS X Yosemite for a Mac Beginner. It is the perfect eBook for people who want to get a hang of a Mac and how to get the most out of it.Understanding Menu Bar and the Apple Menu
Windows has taskbar. That row in the bottom that contains the Start menu, pinned apps, running apps and the system tray or notification center on the far right.
OS X’s equivalent to the taskbar ( or to be more accurate, system tray) is the menu bar. It lives on top of the desktop and unlike the Windows taskbar, you can’t change its position.
The Apple menu has the iconic flat Apple logo as the icon. Here you’ll find machine related options like System Preferences, About This Mac, App Store, Log out, Power off, Sleep, Restart and more.
On the far right you’ll see an icon that looks like a bulleted list. This will bring up the Notification Center. The search icon brings up Spotlight search.
Then there are system icons for the current user, Wi-Fi, AirPlay, Date and Time. Icons for Bluetooth, Time Machine and other system level features, when enabled, will also show up here.
To the right you’ll find icons for running apps like Dropbox, Evernote and more (just like you would on the system tray in Windows). Menu bar app icons are usually interactive ( or else there’s no reason for them to be in the menu bar). For instance, clicking the Dropbox icon shows you the latest uploads, while Evernote brings up a quick text entry field.
The white space between the Apple icon and running apps is filled by the app specific menus. In Windows apps you might have noticed menus like File, Edit etc taking up an entire row below the titlebar. On Mac, these menus show up on the menu bar itself.
The Dock
In simple terms, the Dock on OS X is like the app management part of the Windows taskbar. In the Dock you’ll find pinned apps, active apps, minimized apps and even designated folders. The biggest part of using the Mac is interacting with apps in the Dock (not Launchpad or the Applications folder). It will be the start and end point of your day-to-day app use.
When you first open up your Mac, you’ll find that the Dock is filled with OS X apps like Mail, iPhoto, Photo Booth, Keynote, FaceTime etc.
When you launch an app from Launchpad, Spotlight or the Applications folder, it will show up in the Dock. You can pin a running app to the Dock by right-clicking the icon (two-finger tap on the trackpad) and selecting Options -> Keep in Dock.
To remove an app from the Dock, simply click the app’s icon, hold and drag it out of the dock and release the trackpad click.
The Dock has its own settings. You can either access it from System Preferences or by right-clicking on an empty space on the Dock.
From here you can change the dock’s position to the left, right or bottom of the screen. It’s advisable to dock it to the left or the right as vertical screen real estate is scarce on a widescreen MacBook. You can also increase the size of the Dock, turn on magnification or switch from the Genie effect or Scale effect when maximizing/minimizing windows.
How to Create New Users Accounts and Switch between Them
If you share your Mac with your family members or just want to hand it over to a friend for some browsing, it’s important to have multiple user accounts (or just a guest account) set up for your privacy.
Go to System Preferences -> Users and Groups. You’ll see a Guest User account enabled here by default.
To start editing, click the lock icon in the bottom-left corner and enter your password.
Click the + button to create a new user. OS X allows you to create four kinds of accounts:
- An Administrator (admin) can do anything with the Mac. Create, delete, modify files, install software, change settings etc.
- Standard users can do all of the above other than manage user accounts.
- Managed with Parental Controls allows parents to restrict apps, inappropriate content and limit the time the kid spends on the computer (more on that below).
- A Sharing Only user can access shared files or screens on the network. They don’t have the right to create, change files or install applications.
Once you’ve decided which kind of account you want, go ahead and enter the full name and account’s name. You can bind a user account to an iCloud account (this is just for the user account and not for the iTunes/App Store account) and either use the same iCloud password as authentication or add a different password altogether.
After that click the Create User button.
Restrictions in Guest Mode
Guest Mode in Mac runs in a kind of silo environment that’s separate from your own account.
The most important thing to know about Guest Mode is that by default OS X erases everything at the end of a guest session. That means browsing history, file downloads, everything.
Using Parental Control to Block Access to Applications
If your kids borrow your Mac for browsing or to do some homework, you don’t really want them reading your email or looking at your super secret work documents. This is where the Managed with Parental Controls kind of user account comes in handy.
To set it up, go to System Preferences -> Users & Groups and when creating a new account, choose Managed with Parental Controls as an option.
After the account is set up, select it from the left pane, click the Parental Controls button and click the lock to make the changes (Note: You can do the same for guest accounts as well).
From the Apps section you can uncheck the apps you don’t want the user to access and from the Web section you can either whitelist the sites the user is allowed to visit or specifically block the ones they are not.
What’s Dashboard and is It Still Useful in the Time of Notification Center Widgets?
Dashboard was first introduced in OS X 10.4 Tiger (released in 2005) and still lives on. Dashboard is a collection of widgets. The widgets are essentially small, custom websites (written in HTML and JavaScript). Apple bundles a couple of widgets like Stickies, Calculator, Define but you can find lot more widgets on the internet. Everything from monitoring Google Analytics for your website to tracking package deliveries to monitoring time zones can be done with Dashboard widgets.
More likely than not, Dashboard is on the way out. And the replacement, Notification Center widgets, are already in place with OS X 10.10 Yosemite.
Did You Know? When Apple was working on the first iPhone and the iPhone OS 1.0, the engineers thought of using the code from Dashboard widgets to run apps like Weather and Stocks. But it was soon deemed too slow and unresponsive for the touchscreen and the apps were ultimately re-written, this time with native code.In Yosemite, widgets work and look similar to the ones in iOS 8. The fundamental difference between Dashboard widgets and Notification Center widgets is that Dashboard widgets are far more customizable and most of them are free.
Anyone can make and add Dashboard widgets easily. On the other hand, Notification Center widgets can’t even be installed on their own. They need to be bounded by an app. But the future is clearly Notification Center widgets, so let’s focus on that.
Apple bundles 9 widgets like Weather, World clock, Calculator, Calendar and more. And while the collection of third-party widgets isn’t as great as Dashboard’s, it’s getting better day by day.
To get to the Notification Center, do a two-finger swipe towards the left from the right edge of the trackpad or click the list icon on the far right of the menu bar. You’ll see two sections up top. Today and Notifications. Today section will show you widgets.
More about Trackpad Gestures: Apple has a useful page to help you learn more about Mac’s multi-touch gestures. If you were not sure how to do the two-finger swipe to access the Notification Center when we talked about it above, you can see a demonstration of that on this page.To add more widgets, click the Edit button. You’ll see a new pane slide in from the right. If you download an app that has widget support, it will show up on this pane. Click the green + icon to add a widget to the Today view.
More about Notification Center Widgets: Know more about the built-in Notification Center widgets and a couple of third party ones here. We’ve also written about how to get lyrics from iTunes in the NC as well as system monitoring stats.Just Switched to a Mac? Get our eBook
– The Ultimate Guide to OS X Yosemite for a Mac Beginner. It is the perfect eBook for people who want to get a hang of a Mac and how to get the most out of it.The above article may contain affiliate links which help support Guiding Tech. However, it does not affect our editorial integrity. The content remains unbiased and authentic.Also See#desktop #OS X Yosemite
Did You Know
Zoom started in 2012 in the United States.
More in Mac
Comments are closed.